ac-tech-logo

Send Email

[email protected]

Working Hours

Mon-Sat 09:00AM - 07:00PM

Need Any Help?

+91-8128680813

D200 General Series Inverter

Home D200 General Series Inverter
NL1000+ AC Drive

D200 General Series Inverter

  • D200 series is a small power model inverter based on the market demand of small power and small volume, with a power range of 0.4KW~3.7KW.

  • With the advantages of high power density, high protection,high EMC design, etc.

  • It can be widely used for transmission in low-poweroccasions such as logistics, ceramics, woodworking, glass, food, and engraving

Power Range

  • AC 1 PH 220±15%V, 0.4-2.2kW
  • AC 3 PH 220±15%V, 0.4-2.2kW
  • AC 3 PH 380±15%V, 0.75-3.7kW

Technical Specification

Item Specification
Output Frequency Range Control mode V/F control Flux vector control
Frequency Resolution Digital : 0.02% Analog: 0.1%
V/F curve Linear, square root, random V/F
Overload capability 150% rated current 60s; 180% rated current 3s
Start torque G type: 3Hz/150%（VF）；1Hz/150%（Flux vector ）
Torque compensation Manual torque compensation (0.1%~30.0%), auto torque compensation
Configuration Control power supply +24V Max. output current: 300mA
Input terminal 4 channels digital input terminals (DI1 ~ DI4), Two analog input terminals, AVI is used for voltage (0V ~ 10V) input, ACI is used for current (0/4mA ~ 20mA) input.
Output terminal 1 channel analog output terminal FM1, can output both voltage (0V ~ 10V) and current (0mA ~ 20mA). 1-way relay output T1, DC 30V/1A below AC 250V/3A below.
Running Mode of operation Keyboard, terminal, RS485 communication
Frequency source 14 main frequency sources, 14 auxiliary frequency sources. They can be combined and switched via multiple modes. The input mode of each frequency source can adopt multiple ways: keyboard potentiometer, external analog, digital reference, impulse reference, Multiplex Directive, simple PLC, communication, arithmetic results, etc.
Acceleration/deceleration time 4-group straight line (terminal switch can be selected via acceleration and deceleration time), S curve 1 and S curve 2.
Emergency stop Interrupt frequency inverter output instantly
Multiplex Speed 16-phase speed is allowable to set at most and use various combination of multiplex directive terminal to switch
Simple PLC function Continuously run 16-phase speed and independently set acceleration and deceleration time and running time
Jogging Control Independently set Jogging frequency and jogging acceleration and deceleration time, additionally, set the unit under running state and confirm whether the jogging is preferential
Rotating Speed Tracking Frequency inverter starts operation by tracking the load speed
Fixed-length and fixeddistance control Realize fixed-length and fixed-length control function through the pulse input
Counting control The counting function is realized via pulse input
Swing frequency control Applied to the weaving and winding equipment.
Built-in PID The process control closed loop system can be realized.
AVR function In case of voltage surge of power grid, ensure stable output
CD braking Realize fast and stable shut-down
Slip compensation Compensate the rotation speed deviation due to load increasing
Hopping Frequency Prevent resonance with load
Sagged Function Balance the load of multiple motors with the same load.
Timing control Be able to realize automatic shutdown of the frequency inverter when reaching given time